We deal with these situations on a daily basis. There might be flood at your neighbour’s flat or part of the wall may fall down. What to do and how to protect 3D wall panels? In case of flood, remove moisture from the room. If it is warm outside, air out the room. If you have acces to dehumidifer, use it.

An important factor is how long the panels have been under water. If panels have not been under water for a very long time, they will probably not be permanently damaged. However, if 3D panels are mechanically damaged, they can be repaired with gypsum fillers. If panels have been severely damaged, they can always be replaced with new panels. Replacement of all 3D panels is not necessary. Only the damaged ones need to be replaced.

You have installed 3D wall panels and now you’d like to hang a lamp or a painting on this wall? No problem.
Lamp or painting mounting is done in the same way as on regular, flat, plastered wall. If elements you’d like to hang are not too heavy, they are simply installed on a dowel or a screw. Particular attention is on the choice of the screw of sufficient length, which is then dowel inserted to reach the supporting member of the wall.

If elements for hanging on the wall are really heavy, call us and we will advise you on how to solve this problem.

3D Tiles system is a revolutionary way of using gypsum to decorate in 3D technique. These days gypsum is often used in construction. Namely, there is almost no room where gypsum is not used.

3D wall panels are made of high quality gypsum with high level hardness and resistance to scratching. Therefore, we can say that nowadays gypsum is used as a decorative material because 3D panels are made of gypsum and give spaces a special decorative look.

Installation of 3D panels is described on the page Installation. How long does it take to install 3D panels? Time period necessary for the installation of 3D panels on the wall depends on the size of the project i.e. the wall surface on which one needs to install 3D panels.

If one installs 3D panels on the wall of a living room, installation can be done on average in one to two days. This time period also includes painting of the panels. Installation of 3D panels in a living room is a smaller project. Bigger projects take more time.

Installation of the same model of 3D panels might seem monotonous and boring. However, there is another important element when viewing panels live – our panels are three-dimensional and they are exiting from the wall into the depth of the space. Other big factor is lighting which changes their appearance. Depending on the distance and angle of the lighting element, in some areas shadows are deep, and in other areas there are no shadows. That is how repetition of patterns is broken on the whole wall surface.

Some of our models of 3D panels have a characteristic appearance and are made of minimum two panels, which additionally reduces the effect of repetition. Our designers correct the design in correlation to lighting in the process of design and modelling on the computer in order to reduce the repetitiveness of the pattern.

We offer various three-dimensional models of 3D panels: roses, waves, pyramids, tapestry, ocean, cracked, qubes, dunes, flames, stars, hexy, buttons, triangles…

Check out our gallery of 3D panels.

3D panels are one of the ways to decorate the interior. They will give your space a new, modern look. Why choose 3D panels for wall decoration? The simplest solution may be to plaster and paint the wall. This is also the cheapest option. However, every person is an individual and wants to emphasize his/her creativity and identity in the space surrounding him/her and where he/she lives – his/her home.

We offer 3D Tiles panels which represent the focus and draw attention to themselves in the space. They are non-repetitive as the same panel model looks completely different in various colours. We also should not forget that lighting additionally points out its completely individual look.

Check our offer of 3D panels.

To help you with the installation of 3D panels on the wall, we prepared step-by-step instructions which you can find on the page Instructions. Also, 3D panel installation instructions are delivered with every panel.

The following tools are necessary for 3D panel installation on the wall: drill bit with countersink, trowel, Japanese trowel, gypsum-based adhesive, fine spackling paste, spirit level, paint gun, paint roller, battery-operated drill-screwdriver, sand paper (granulation 180-240), screws and dowels.

3D panels are made of high quality gypsum, water, fibres and additives. How thick are 3D panels? The thinnest 3D panel is 9 mm thick, whereas the thickest is 50 mm. However, it is possible to manufacture custom-made thicker panels, too.

The weight of 3D wall panel depends on their design. It varies from 6 to 9 kg with dimension 600×600 mm. We can also make much bigger 3D panels.

3D panels are an ideal way of decorating wall surfaces of the interior. Do we offer “turnkey” service for installation of 3D panels?

To help you with 3D panels installation, we cooperate with several teams for gypsum panels installation, but mostly on the territory of Croatia. For customers from other countries we can only offer help with advice and our 3D panels installation instructions. You can watch a video about 3D panel installation on page Installation.